CCM notes on programming - AD54.21-P-2003-04A

Model 210 

When connecting new control modules to battery voltage for the first time or when retrofitting ATA, driver's seat with memory, front passenger seat with memory, rain sensor, the following data must be programmed using the HHT.

Coding 

• /ECE
• 
• Right-hand steering/left-hand steering
• Model 210.0 (Sedan)

  Model 210.2 (T-model)

Coding of equipment 

• ATA
• Driver's seat with memory
• Front passenger seat with memory
• Rain sensor
• Taxi

  If the fault memory of the CCM is erased, the fault memory of the CF and MSC is automatically erased.

  The multi-function control module (N10-1) can be programmed any number of times.