LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2002 >> CLK55 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 6 (Keyless Entry System - C230, C280, CLK320, E300, E320, E430, E500, Cl500 & Cl600) >> Programming >> Ignition Lock Control Module

Ignition Lock Control Module

WARNING: This page does not describe the selected car, but rather 29 other vehicles, including the 1999 Mercedes-Benz E430, 1999 Mercedes-Benz E320, 1999 Mercedes-Benz E300, 1999 Mercedes-Benz CLK430, and 1999 Mercedes-Benz CLK320. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Hand-Held Tester (HHT) (965 589 00 01 00) is necessary to set control module parameters.
CAUTION: When programming control module, avoid interrupting control module voltage supply. Damage to control module may result. DO NOT connect HHT to Data Link Connector (DLC) with ignition on. Damage to HHT may result.

Connect HHT to DLC. DLC is located in right rear corner of engine compartment. Programming (also referred to as version coding) is menu driven. Follow HHT manufacturer's instructions displayed on HHT screen to program control module. No additional information is available from manufacturer at time of publication.

scientia non olet · About LEMON Manuals