Removing and installing bottom section of instrument panel on driver's side - AR68.10-P-1505K
MODEL 208
Fig 1: Identifying Driver's Side Instrument Panel Bottom Section Remove/Install Components - Model 208 (1 Of 3)
Fig 2: Identifying Driver's Side Instrument Panel Bottom Section Remove/Install Components - Model 208 (2 Of 3)
Fig 3: Identifying Driver's Side Instrument Panel Bottom Section Remove/Install Components - Model 208 (3 Of 3)
| Removal, installation | |||
|---|---|---|---|
| 1 | Remove cover below instrument panel (left) | AR68.10-P-1500K | |
| 2 | Unclip cover (2) and remove | Figure | |
| 3 | Unscrew screws (4 and 5) | ||
| 4 | Remove cover (3) downward | ||
| 5 | Unhook control cable from handle (6) and remove handle (6) | ||
| 6 | Unscrew screws (7) and remove housing (17) toward front | ||
| 7 | Unscrew screws (8, 9 and 10) | ||
| 8 | Unclip cover (11), unclip switch (12) and remove cover (11) | Figure | |
| 9 | Unscrew screws (13 and 14) and pull light module switch (15) out toward front | ||
| 10 | Unscrew screw (16) and remove bottom section of the instrument panel (1) downward | ||
| Fig 5 | |||
| 11 | Reinstall in opposite order |