Measuring wheel carrier (when removed) - AR40.30-P-0425A

MODEL 129, 170, 171, 202, 203, 208, 209.3 /4, 210

Left wheel carrier shown

Fig 1: Measuring Wheel Carrier - Left Wheel Carrier Shown (1 Of 4)

Fig 2: Measuring Wheel Carrier - Left Wheel Carrier Shown (2 Of 4)

Fig 3: Measuring Wheel Carrier - Left Wheel Carrier Shown (3 Of 4)

Fig 4: Measuring Wheel Carrier - Left Wheel Carrier Shown (4 Of 4)

MODIFICATION NOTES

14.10.02	Value changed from 15.1 ± 1 to 52.2 ± 1	Value changed in lower row 2 in row 1001 for models 129, 170, 202, 203, 208, 209.	*BE40.30-P-1001-02A
14.10.02	Value changed from 41.2 ± 1 to 28.0 ± 1	Value changed in lower row 3 in row 1001 for models 129, 170, 202, 203, 208, 209.	*BE40.30-P-1001-02A

	Measure
1	Place wheel carrier for measurement with the wheel hub or brake disk on parallel supports	Parallel supports, length 150 mm (2 ea.)	*WH58.30-Z-1015-12A
2	Measure and note height dimension (A) as comparative measurement with the height marking device (025)	Measure on the flat surface of the brake caliper mounting (arrow).
		Height marking device, measuring range up to 500 mm	*WH58.30-Z-1016-12A
3	Measure and note height dimensions (B1, B2, B3) at the lowest point of the respective bore.	The test values are the difference between the height dimension (A) and the height dimensions: B1 = Thrust arm mounting B2 = Tie rod mounting B3 = Torque strut mounting	*BE40.30-P-1001-02A

TEST VALUES FOR WHEEL CARRIER

Number	Designation			Model 129	Model 170
BE40.30-P-1001-02A	Difference in height measurement	"A" - "B1"	mm	28,1 ± 1	28,1 ± 1
		"A" - "B2"	mm	52,2 ± 1	52,2 ± 1
		"B3" - "A"	mm	28,0 ± 1	28,0 ± 1
		For picture, see		AR40.30-P-0425A	AR40.30-P-0425A

TEST VALUES FOR WHEEL CARRIER

Number	Designation			Model 171	Model 202	Model 203
BE40.30-P-1001-02A	Difference in height measurement	"A" - "B1"	mm	28.1 (± 1)	28,1 ± 1	28,1 ± 1
		"A" - "B2"	mm	52.2 (± 1)	52,2 ± 1	52,2 ± 1
		"B3" - "A"	mm	28.0 (± 1)	28,0 ± 1	28,0 ± 1
		For picture, see		AR40.30-P-0425A	AR40.30-P-0425A	AR40.30-P-0425A

TEST VALUES FOR WHEEL CARRIER

Number	Designation			Model 208	Model 209	Model 210
BE40.30-P-1001-02A	Difference in height measurement	"A" - "B1"	mm	28,1 ± 1	28,1 ± 1	33,2 ± 1
		"A" - "B2"	mm	52,2 ± 1	52,2 ± 1	45,4 ± 1
		"B3" - "A"	mm	28,0 ± 1	28,0 ± 1	42,9 ± 1
		For picture, see		AR40.30-P-0425A	AR40.30-P-0425A	AR40.30-P-0425A

COMMERCIALLY AVAILABLE TOOLS

Number	Designation
WH58.30-Z-1015-12A	Parallel bases
WH58.30-Z-1016-12A	Height marking device