Removing and installing torsion bar on front axle - AR32.20-P-0300C

MODEL 170, 202, 208 

Fig 1: Identifying Torsion Bar On Front Axle Remove/Install Components - Model 170, 202, 208

	Removal, installation
	Replace self-locking bolts and nuts.
1	Remove bracket (22b).	Nut (22f)	*BA32.20-P-1001-02C
2	Remove bracket (21b).	Nut (21i)	*BA32.20-P-1002-02C
		Nut (21f) Installation:  Due to the preload of the bracket (21b), first install the hexagon socket bolt (21h).	*BA32.20-P-1003-02C
3	Remove spring leaf swivelling lever (21) and mounting plate (21c).	Comply with spring leaf swivelling lever assignment! The spring leaf swivelling lever (21) differs on the left and right and is mounted differently depending on the model.
		Bolt (21d)	*BA32.20-P-1004-02C
4	Remove torsion bar (10).	Installation:  Align torsion bar (10).
5	Pull rubber mounts (21a, 22a) off torsion bar (10).
6	Install in reverse sequence.

FRONT AXLE TORSION BAR

Number	Designation			Model 202	Model 208
BA32.20-P-1001-02C	Self-locking nut for fastening bracket to wishbone		Nm	20	20
BA32.20-P-1002-02C	Self-locking nut for fastening bracket to top of spring leaf swivelling lever	M10	Nm	40	40
BA32.20-P-1003-02C	Self-locking nut for fastening bracket to bottom of spring leaf swivelling lever	M8	Nm	20	20
BA32.20-P-1004-02C	Self-locking bolt for fastening spring leaf swivelling lever to side member		Nm	60	60

FRONT AXLE TORSION BAR

Number	Designation			Model 170
BA32.20-P-1001-02C	Self-locking nut for fastening bracket to wishbone		Nm	20
BA32.20-P-1002-02C	Self-locking nut for fastening bracket to top of spring leaf swivelling lever	M10	Nm	40
BA32.20-P-1003-02C	Self-locking nut for fastening bracket to bottom of spring leaf swivelling lever	M8	Nm	20
BA32.20-P-1004-02C	Self-locking bolt for fastening spring leaf swivelling lever to side member		Nm	60