Fitting on engine support frame, raising engine - AR33.10-P-0100-01AV

Fig 1: Identifying Rear Supports And Shock Absorber Supports

Fig 2: Identifying Engine Support Frame

Fig 3: Identifying Rear Supports, Position Sensor And Shock Absorber Supports

Shown on model 208.365 with engine 112.940 

The specified value position sensor R/25 must be removed beforehand on models 208.370/470 with engine 113.943/984.

The two rear supports (2, 4) of the engine support frame (1) must be seated on the shock absorber supports (3, 5).

The two front supports (with rubber buffers) of the engine support frame (1) must be seated on the front panel (arrows).

Raise engine at the front lifting eye.