Removing and installing soft top seal on front door side window - AR77.30-P-3360KA

MODEL 208.435 /444 /445 /447 /448 /465 /470 

Fig 1: Identifying Soft Top Seal On Front Door Side Window Remove/Install Components

	Removal, installation
1	Open soft top	Lay soft top down in soft top compartment, do not close soft top compartment cover
2	Unscrew screws (1) from seal (2)	Torx bit set	Fig 2
3	Pull seal out of clamping channel roof frame	Installation:  Coat seal with lubricant before installing	*BR00.45-Z-1010-06A
4	Install in the reverse order

REPAIR MATERIALS

Number	Designation	Order number
BR00.45-Z-1010-06A	Antifriction agent	A 000 989 03 67

Fig 2: Identifying Torx Bit Set (000 589 01 10 00)