  |
Removal, installation |
|
|
| 1 |
Move driver's seat all the way to the rear and seat cushion (1) forward |
|
|
| 2 |
Remove covering from front seat frame |
|
AR91.10-P-1200N |
| 3 |
Unhook tensioning straps (2) |
 Installation
: Hook in tensioning straps (2) so that they are tensioned tightly |
|
| 4 |
Disconnect seat heater connector (2) and seat ventilation connector (4) from left and right convenience seat adjustment control module (N31, N32) |
With automatic child seat recognition sensor (ACRS) on the passenger seat, disconnect left and right convenience seat adjustment control module connector (N31, N32) in addition |
|
| 5 |
Move seat backrest completely forward and pivot covering on tensioning element (5) upward (see arrows) |
|
|
| 6 |
Unscrew screw (6) |
 |
*BA91.10-P-1005-01C |
| 7 |
Disconnect horizontal seat cushion adjustment servo motor connector (X54/16) from seat cushion motor (M26m6) |
|
|
| 8 |
Move driver's seat completely forward and move front seat cushion (1) upward |
|
|
| 9 |
Pull seat cushion (1) out of front and rear sliders (7, 8) toward front and remove |
Installation
: Slide seat cushion (1) correctly into the front and rear sliders (7, 8) Grease sliders (7, 8) |
|
| |
|
|
*BR00.45-Z-1007-06A |
| 10 |
Install in opposite order |
|
|
| 11 |
Check seat cushion adjustment for proper function |
|
|