Removing and installing COMAND operating, display and control module - AR82.85-P-7472N
MODEL 215 with CODE (352a) COMAND operating and display system
| Removal, installation | |||
| 1 | Connect quiescent current retention unit | AR54.10-P-1030-07I | |
| 2 | Disconnect ground lead from battery | AR54.10-P-0003I | |
| 3 | Remove cover on center console (1) | AR68.20-P-2350N | |
| 4 | Disconnect electrical connectors | ||
| 5 | Unscrew screws (2) and pull out COMAND operating, display and control module (A40/3) | ||
| 6 | Install in opposite order |