Slackening and unscrewing hexagon collared nut at joint flange; - AR35.31-P-0550-05A
| Pressing bush for wrench socket | WF58.50-P-3531-02A |
COMMERCIALLY AVAILABLE TOOLS
| Number | Designation |
|---|---|
| WH58.30-Z-1013-06A | Wrench bit 41 mm hexagon 3/4 inch four-point |
- Fit pin wrench (040) on joint flange (41). Using a commercially available socket wrench bit (040a), slacken and remove hexagon collared nut.
To improve guidance when loosening the hexagon collared nut, press shop-made bush into the commercially available socket wrench bit: Do not remove the collar protection when slackening hexagon collared nut.