Remove and install cover on rear seat cushion - AR91.18-P-1850M
MODEL 220.0 /1 with CODE (223b) Electrically adjustable rear bench seat with CODE (224c) Electrically adjustable rear single seats, with seat ventilation, seat heater and memory package
Shown with electrically adjustable rear bench seat, code 223b
Covering shown on electrically adjustable individual rear seats, with seat ventilation, heated seats and memory package, code 224c.
| Remove/Install | |||
| 1 | Remove rear seat cushion | ||
| With electrically adjustable rear bench seat, code 223b. | AR91.12-P-1020M | ||
| Model with electrically adjustable individual rear seats, with seat ventilation, heated seats and memory package, code 224c. | AR91.12-P-1020MB | ||
| 2 | Detach upholstery (1) from retaining lugs (2) | ||
| 3 | Unclip upholstery (1) all way round from plugin fold (arrows) in cushion frame (3) | ||
| 4 | Remove cushion frame (3) from rubberized fiber matting/foam/padding (6) | ||
| 5 | Unhook stapling clips (5, 3 pieces) from the side stapling wires (4) pointing towards the rear door | ||
| Figure | |||
| 6.1 | Unhook the stapling clips (5, 2 pieces) from the side stapling wires (4) pointing towards the stowage box | With electrically adjustable individual rear seats, with seat ventilation, heated seats and memory package, code 224c. | |
| 7 | Detach stapling clips (5, 8 pieces) from stapling wires (4) out of the rubberized fiber matting/foam padding (6) | ||
| Installation tool for retaining wire | WF58.50-P-9118-02A | ||
| 8 | Remove covering (1) from rubberized fiber matting/foam padding (6) | Installation: Align covering (1) and turn around at the side. | |
| 9.1 | Pull stapling wires (4) out of the foam sleeves of covering (1) | ||
| 10 | Install in the reverse order |