Remove and install tensioning rail and slide rail in timing case cover - AR05.10-P-8500M
ENGINE 275
Fig 1: Identifying Slide Rail Short, Slide Rail Long, Tensioning Rail And Guide Wheel In Timing Case Cover Components
| Remove/install | |||
| 1 | Remove timing case cover | AR01.40-P-8000M | |
| 2 | Detach slide rail short (1) and slide rail long (2) to the front from guide pins | ||
| 3 | Detach tensioning rail (3) to front from guide pin. | ||
| 4 | Install in the reverse order |