Removing and installing telescoping nozzle for headlamp cleaning system - AR82.15-P-6100N
MODEL 215 with CODE (600a) Headlamp cleaning system
Fig 1: Identifying Telescoping Nozzle For Headlamp Cleaning System Remove/Install Components (Model 215)
| Removal, installation | |||
| 1 | Fold telescoping nozzle (1) cover toward front | ||
| 2 | Unscrew screws (2) from telescoping element mount (3) | ||
| 3 | Remove engine compartment paneling | AR61.20-P-1105M | |
| 4 | Disconnect washing water hose (4) with clamp | Figure | |
| 5 | Pull off retaining clamp (5) and remove washing water hose (4) from telescoping element mount (3) | ||
| 6 | Unscrew screw (7) | ||
| Remove fog lamp | AR82.10-P-5103N | ||
| 7 | Pull telescoping unit (6) downward and out | ||
| 8 | Install in opposite order | ||
| 9 | Check water level in headlamp cleaning system, correct | AP82.35-P-8210Z | |
| 10 | Check for proper function |