Close sliding/pop-up roof, function - GF77.20-P-2002S

MODEL 215.3 

MODEL 220.0 /1 with CODE (414a) Electric glass sliding/pop-up roof 

MODEL 220.0 /1 with CODE (491) USA version 

MODEL 220.075 /175 with CODE (498) Japanese version 

Function prerequisites 

• No overvoltage or undervoltage
• Circuit ON or
• Circuit 15 ON and
• The overhead control panel control module (N70) recognizes the neutral position before switch is activated (switch not actuated for longer than 40 ms)

Function 

The Close sliding/pop-up roof  function is only available when the sliding/pop-up roof (SR) (M12) is in the synchronized state 

It is triggered by pulling the SR switch (N70s1) downward. The overhead control panel control module (N70) then actuates the SR motor (M12m1)The direction in which the motor is actuated depends on whether the sliding roof or the pop-up roof is open. The SR motor (M12m1) is actuated as long as the SR switch (N70s1) is pressed, however, max. only 50 s (maximum activation time). The Close sliding/pop-up roof  function is interrupted if lock-up  or obstruction  of the sliding/pop-up roof (SR) (M12) is recognized.