Checking tires for lateral and radial runout - AR40.10-P-1025A
MODEL all
| Measure the lateral and radial tire runout on a balancing machine with stationary concentricity measuring device | *WH58.30-Z-1001-18A | ||
| Measuring | |||
| 1 | Measure lateral tire runout (permissible lateral runout max. 1.5 mm) on the tire side wall level with the center of the tire | Choose the measuring point so that the roller does not run across the tire designations or the protective strip. | |
| 2 | Measure radial tire runout in the center of the tread surface (permissible radial runout max. 1.0 mm) | ||
| 3 | Eliminate radial runout | AR40.10-P-1025-01A |
COMMERCIALLY AVAILABLE TOOLS
| Number | Designation |
|---|---|
| WH58.30-Z-1001-18A | Concentricity measuring device for wheels and tires |
OPERATION NO. OF OPERATION TEXTS OR STANDARD TEXTS AND FLAT RATES
| Category | Op. no. | Operation text | Time | Acc. no. | Code |
|---|---|---|---|---|---|
| P | 401450 | Remove and install wheels (all) | 007 WU | - | - |
| P | 023789 | Optimize bead seat on all 4 unidirectional tires | 006 WU | - | - |
| P | 402070 | Stationarily balance wheels (4) (wheels removed), model 203, 211 | 004 WU | - | - |
| P | 402070 | Stationarily balance wheels (4) (wheels removed), model 230 | 006 WU | - | - |
| P | 402181 | Perform additional work to balancing tires: attach adhesive weight to disk wheel | Time prescribed by foreperson | - | - |
| P | 406560 | Align vehicle (electronically/with adjustment operations), model 230 | 015 WU | - | - |
| P | 406716 | Perform additional work to alignment: adjust camber/caster on left half of front axle, model 211, 230 | 006 WU | - | - |
| P | 406717 | Perform additional work to alignment: adjust camber/caster on right half of front axle, model 211, 230 | 006 WU | - | - |
| P | 406560 | Align vehicle (electronically/with adjustment operations), model 203, 211 | 012 WU | - | - |
| P | 406716 | Perform additional work to alignment: adjust camber/caster on left half of front axle, model 203 | 010 WU | - | - |
| P | 406717 | Perform additional work to alignment: adjust camber/caster on right half of front axle, model 203 | 010 WU | - | - |