Pull off belt pulley / vibration damper - AR03.30-P-1600-02GS

Fig 1: Identifying Two-Legged Puller (000 589 88 33 00)

1. Screw the center bolt (5) into the crankshaft.
2. Fit on puller (08) at the belt pulley/ vibration damper (62) with its claws pointing out (arrows).
3. Position the spindle of the puller (08) at the head of the center bolt (5).
4. Pull belt pulley/vibration damper (62) off the crankshaft.
   Fig 2: Identifying Puller, Belt Pulley/Vibration Damper And Center Bolt