Cleaning light alloy wheels - AP98.30-P-8070-07A

Cleaning of the light alloy disk wheels is facilitated by the use of a sponge brush.

Application 

Allow cleaner to intensively act on the light alloy disk wheel. Use a sponge brush to loosen the brake dust in the ventilation holes. Next, hose down the light alloy disk wheel with a water hose or a high-pressure cleaner.

To avoid damaging the tires and paintwork, the water jet from the high-pressure cleaner must not be aimed at a single point on the tire or wheel for any length of time. Furthermore, a minimum distance of the water jet of 300 mm has to be maintained.