Destination guidance in digitalized map area, function - GF82.61-P-4000PMU

MODELS 203.0 /2 /7 as of 24.4.04 with CODE (530) COMAND APS USA (with navigation system) 

During trips within the digitized map area, the following information calculated by the navigation processor of the COMAND operating, display and control unit (A40/3) is available to the user:

• The current route and position of the vehicle on a digital map (graphically depicted)
• Route list
• Distance from the destination and estimated time of arrival
• Direction recommendation
• Arrow indicating the driving direction
• Name of the road currently being traveled along
• Name of the next road into which the vehicle should turn
• Distance from the next junction (specified in units of length or as a bar graph)

The compass direction is displayed by North, South, East and West (through graphical display and voice output). It is only displayed for numbered roads. No data and display of the compass direction is given in the case of roads designated by name (e.g. within towns).

For destination guidance, 3 illustration modes are possible:

• Map
• Map and symbol presentation of the turnoff points
• Symbol presentation (system of navigation symbols)

The scale of the map can be changed in stages (100 m/cm to 500 km/cm). In addition to this, it is possible to select whether the map is to be displayed in the direction of travel or to the North.

Bplue Point Travelpilot DX Navigation Digital Versatile Disk (DVD) 

Separate one-way lanes (fine geometry) are automatically displayed with this DVD.

The DVD type (with the latest fine geometry) is automatically detected and the graphic displayed in an optimized 2nd set of line thicknesses.

Actual destination guidance is significantly supported via voice output.