Notes on removing and installing rear window - AH67.20-P-2000-01P

Model 203 

Danger of damage when cutting out. Therefore mask window cutout on body at top and at side.

When cutting out move blade along window as close as possible. Model 203.0, model 203.2: Cut silicon semi-conductors for ground connection and replace when installing.

Allow primer to air-dry for at least 10 minutes.

Open window in driver's door.

This prevents the rear window from being pressed outwards by the air pressure when a door is closed before the bond has completely cured Install window within five minutes before adhesive force of glue decreases.

When installing water deflector use new clips.