Remove/install rear-end door lock - AR72.20-P-2550PA

MODEL 203.2 

Fig 1: Identifying Rear-End Door Lock Remove/Install Components

	Remove/install
1	Remove door lining on rear-end door	Only bottom door lining.	AR68.30-P-1050PA
2.1	Unhook link rod (1)	Only vehicles up to VIN VINF290580
3	Disconnect electrical connector (2)
4	Remove bolts (3)		*BA72.20-P-1003-02A
5	Remove door lock
6	Install in the reverse order
7	Perform a function test

REAR-END DOOR

Number	Designation		Model 203
BA72.20-P-1003-02A	Screws to door lock	Nm	9