| 1 |
Release rear seat cushion and fold forwards |
|
|
| 2 |
Unscrew screw (1) at belt end fitting |
Belt end fitting screw |
*BA91.40-P-1001-01A |
| 3 |
Remove console for luggage compartment lid (2) |
|
AR68.30-P-4730PB |
| 4 |
Remove edge guard (4) in area of C-pillar paneling (3) |
|
|
| 5 |
Unclip C-pillar (4) at bottom to center of vehicle and pull out of headliner (5) downward |
 Installation:
Do not damage headliner material (5). |
|
| 6 |
Move seat belt (6) through C-pillar paneling (4) |
|
|
| 7 |
Remove C-pillar paneling (3) |
Installation:
Observe installation position of seat belt (6) |
|
| 8 |
Install in the reverse order |
|
|