Remove/install rear roof frame paneling - AR68.30-P-4470PA

MODEL 203.2 

Fig 1: Identifying Rear Roof Frame Paneling Remove/Install Components

	Remove/Install
1	Remove edge guard in area of roof frame paneling (1)
2	Press roof frame paneling (1) off from rear	Position mounting wedge directly next to clips (3) Installation:  Ensure that catch lugs (4) are seated correctly.
			Figure
3	Slide roof frame paneling (1) toward rear, lower and remove toward rear	Installation:  Check clips (3), replace if necessary.
4	Install in the reverse order

Fig 2: Identifying Mounting Wedge (110 589 03 59 00)