Removing and installing wiper arm - AR82.30-P-6100P

MODEL 203 

Shown on model 203.0 

Fig 1: Identifying Wiper Arm Remove/Install Components - Shown On Model 203.0

Shown on model 203.0 

Fig 2: Identifying Driver And Passenger Side Wiper Mark

	Removing
	Injury Hazard!  Windshield wiper mechanism can pinch, crush or, in extreme cases even sever extremities.	Always remove ignition key when working on windshield wiper mechanism.	AS82.30-Z-0001-01A
1	Move wiper arms to park position
2	Open engine hood
3	Unscrew nuts (1)	Passenger side.
4	Remove wiper arm (2)	Passenger side.
5	Unscrew nut (3)	Driver's side.
6	Remove wiper arm (4)	Driver's side.
	Installing
7	Move wiper motor to parking position		AR82.30-P-6800-01P
8	Place wiper arm (4) onto wiper system bevel gear	Wiper blade must lie exactly on mark A in the windshield screen printing.
9	Screw on nut (3)	Wiper arm nut	*BA82.30-P-1004-01A
10	Place wiper arm (2) onto wiper system bevel gear	The wiper blade must be positioned directly on the marking B in the printed screen of the windshield.
11	Screw on nuts (1)	Wiper arm nut	*BA82.30-P-1004-01A
12	Close engine hood
13	Carry out operational check

WINDSHIELD WIPER