Remove/install left amplifier module for window antenna on the rear window - AR82.62-P-8300-02P
Special tools
COMMERCIALLY AVAILABLE TOOLS
| Number | Designation |
|---|---|
| WH58.30-Z-1004-20A | Hot-air gun |
REPAIR MATERIALS
| Number | Designation | Order number |
|---|---|---|
| BR00.45-Z-1019-02A | Bonding agent Sika primer 206 G+P | Sika Deutschland GmbH Stuttgarter Strasse 139 72574 Bad Urach Germany Tel. +49 7125 940-761 Fax +49 7125 940-763 www.sika-industry.de |
| BR00.45-Z-1023-04A | Activator | A 005 989 58 71 |
Fig 2: Identifying Left Amplifier Module For Window Antenna On Rear Window Remove/Install Components
- Loosen amplifier module 2, window antenna (A2/72) from the rear-end door window using a mounting wedge and remove.
Carefully warm up repair area using a hot air gun Always replace amplifier module 2, window antenna (A2/72) after removing it.
- Remove adhesive residue from the rear-end door window using Activator.
- Treat bonding surface on the rear-end door window using glass primer bonding agent.
- Detach protective foil from adhesive pad of amplifier module 2, window antenna (A2/72).
- Place amplifier module 2, window antenna (A2/72) on the rear-end door window and press on.