Remove/install bass module speaker - AR82.62-P-7839PA

MODEL 203.2 with CODE (810) Sound system 

Fig 1: Identifying Bass Module Speaker Remove/Install Components - Model 203.2

MODIFICATION NOTES

24.5.06

"Disconnect/connect ground line on battery" removed

	Remove/install
1	Remove rear passenger compartment side trim panel	Only on right-hand side.	AR68.30-P-4780PA
2	Remove audio power amplifier		AR82.62-P-7720PA
3	Remove bolts (2)
4	Remove resonance body (3)
5	Remove bolts (1)
6	Carefully remove bass module speaker (H4/17)	Do not damage wiring harness
7	Unplug connectors	Installation:  Installation position must be observed.
8	Install in the reverse order