Remove/ install rain sensor - AR82.30-P-7700P

MODEL 203 

Fig 1: Identifying Rain Sensor Remove/Install Components - Model 203

MODIFICATION NOTES

24.5.06

"Disconnect/connect ground line on battery" removed

	Remove/install
1.1	Transfer basic data from rain sensor (B38) to STAR DIAGNOSIS	When replacing rain sensor (B38). Installation:  Transfer buffered basic data to new rain sensor (B38).
	Connect STAR DIAGNOSIS and read out fault memory		AD00.00-P-2000-04A
		STAR DIAGNOSIS diagnosis system	*WH58.30-Z-1048-13A
2	Take off cover (1)
3	Release retaining clamps (2) on rain sensor (B38) to left and right
4	Remove rain sensor (B38)	The lens (3) of the rain sensor (B38) is bonded to the windshield and must not be removed, otherwise the lens (3) will be damaged.
5	Separate electrical connector at rain sensor (B38)
6	Install in the reverse order

COMMERCIALLY AVAILABLE TOOLS

Number	Designation
WH58.30-Z-1048-13A	STAR DIAGNOSIS diagnosis system, Compact Passenger Car	6511 1801 00