Retrofitting handset in armrest - AN82.70-P-8916-06Q

Model 203.0 for fixed telephone installation 

1. Bolt mounting for handset (7) onto paneling (13) with bolts (6).
2. Insert telephone handset (A34) into mounting for handset (7).
   Fig 1: Identifying Cellular Telephone Handset, Telephone Handset Connector, Handset Transmitter And Receiver Connector

   
3. Clip adapter cable (14) into paneling (13).
4. Insert adapter cable (14) into the catch slots (arrows) provided under the paneling (13).
   Fig 2: Identifying Adapter Cable And Paneling

   
5. Insert paneling for telephone handset into telephone shell and secure from below with bolts (4).
   Fig 3: Identifying Adapter Cable

   
6. Guide adapter cable (14) with the fabric hose through the left feed-through of the armrest and secure with locking flap (15).
   Fig 4: Identifying Adapter Cable And Locking Flap

   
7. Clip adapter cable (14) into the retaining clip (arrow) under the armrest.
   Fig 5: Identifying Adapter Cable And Retaining Clip