Retrofit power supply wiring harness - AN82.64-P-0001-03PC

Models 203.0, 203.2, 203.7 up to model refinement with COMAND operating and display system Code 352a.

The voltage supply wiring harness for the CD player with changer is tied back behind the radio or COMAND.

Use a knife to cut out the perforation in the glove compartment (see arrow).

Fig 1: Identifying Cut Out Perforation In Glove Compartment
Route the voltage supply wiring harness for the CD player with changer (1) as per the figure behind the instrument panel carrier through the breakthrough in the glove compartment.

Fig 2: Identifying Voltage Supply Wiring Harness