Carry out start-up and function test - AZ82.61-P-0001-04B
Models 169.0, 169.3, 171, 203, 209, 210, 211, 245.2
The LED's are attached to the ICANI box (2) for initial startup and function checking. For function, see table!
| LED indicator on control unit | Control unit status | Fault | |
|---|---|---|---|
| 1 | No LED illuminates | ICANI has not started | No voltage supply |
| 2 | yellow LED lights up | ICANI booted; waiting for vehicle identification | Error on CAN bus lines |
| 3 | Yellow and red LED's illuminate | ICANI has detected model series; waiting for FSE11 cradle | Error on communication lines to FSE11 |
| 4 | Yellow and green LED's illuminate | ICANI has found FSE11 cradle; now waiting for portable CTEL | Non-supported portable CTEL inserted or Portable CTEL not switching to "Hands-free" mode |
| 5 | All LEDs flash | ICANI blocked | Invalid model series |
| 6 | Green and red LED's illuminate | ICANI has found the portable CTEL; now loading the telephone books; (takes no more than 5 minutes) | Telephone books cannot be loaded |
| 7 | Green LED illuminates | ICANI fully operational |