Remove/install electronic accelerator actuator with flap connection - AR30.20-P-1262A
MODEL 129, 163, 170, 171, 202, 203, 208, 209, 210, 215, 220, 230, 463 (except, 215.376 /378 /379, 220.176 /876 /178 /878 /179, 230.476 /477 /479)
Mass air flow sensor removed
Shown on engine 112 in model 210
Fig 1: Identifying Electronic Accelerator Actuator With Flap Connection Remove/Install Components - Shown On Engine 112 In Model 210
| Remove/install | |||
| 1 | Detach crankcase vent line (1/2) from intake manifold (19) | ||
| 2 | Disconnect electrical connector (arrow) | ||
| 3 | Remove bolts (8/1) and throttle valve actuator (M16/6) | ||
| 4 | Install in the reverse order |