Notes on radio installation - AH82.60-P-0001-03P
Model 203.0
On model 203 radios from the Audio series can installed in the DIN shaft (A) or radios produced especially for model 203 (B). In this case it is necessary to remove the installation console together with the DIN shaft and to install a stowage shell in addition to the radio.
Vehicles not equipped with a standard radio should always
be retrofitted with the radio wiring harness chamber (C).
For radios (A2) with antenna diversity (arrow) it is necessary to install a new antenna amplifier module with diversity and an additional antenna lead.