Adjust headlamps - AR82.10-P-4735A
MODEL 164, 169, 171, 203, 209, 211, 215, 216, 219, 220, 221, 230, 245, 251
Headlamps with projection system (for halogen or xenon headlamps)
MODIFICATION NOTES
| 29.8.06 | Headlamp adjustment changed from manual to automatic for model 216. |
| Risk of death
caused by high voltage levels present at xenon headlamps. Risk of explosion/fire due to highly flammable materials in the area of damaged xenon bulbs Risk of injury caused by UV light, hot components on xenon headlamps and glass splinters when xenon bulbs are bursting Risk of poisoning due to inhaling mercury vapors and when swallowing/coming in contact with toxic salts and mercury compounds |
Do not come into contact with parts that are under high voltage. Persons with active electronic implants (e.g. heart pacemakers) must never work on xenon headlamps. Switch off entire lighting system. Wear insulating safety shoes, safety glasses, and protective gloves. Remove highly inflammable materials from the hazard area. Ensure that the working area is sufficiently ventilated. | AS82.10-Z-0001-01A | |
| 1 | Switch off the ignition and remove the transmitter key from the EIS control unit | Remove Keyless Go transmitter card or transmitter key from vehicle and store beyond reach of transmitter (min. 2 m). |
|
| 2 | Open engine hood | ||
| 3 | Adjust headlamps | ||
| Adjusting headlamps when driving abroad | AH82.10-P-0001-01A | ||
| 4 | Close engine hood | ||
| 5 | Check headlamp adjustment | ||
| Check and correct headlamp adjustment | |||
| Model 164 | AP82.10-P-8260GZ | ||
| Model 169, 245 | AP82.10-P-8260AK | ||
| Model 171.4 | AP82.10-P-8260V | ||
| Model 203, 209 | AP82.10-P-8260P | ||
| Model 211 | AP82.10-P-8260T | ||
| Model 215, 220 | AP82.10-P-8260M | ||
| Model 219.3 | AP82.10-P-8260TX | ||
| Model 216, 221 | AP82.10-P-8260SX | ||
| Model 230 | AP82.10-P-8260R | ||
| Model 251 | AP82.10-P-8260RT |