Removing taillamp - AR82.10-P-4905P

MODEL 203.0 /2, 209.3 /4

Shown on model 203.0

Fig 1: Identifying Left/Right Taillamp - Shown On Model 203.0

MODIFICATION NOTES

11.2.04

Disconnect/connect/remove ground line from battery

	Removal/installation
1	Fold up side panel in area of left taillamp (E3), right taillamp (E4)
2.1	Loosen left sidewall paneling, right sidewall paneling on right in top section	With model 209.4
3	Disconnect electrical connector from left taillamp (E3), right taillamp (E4)
4	Unscrew nuts from left taillamp (E3), right taillamp (E4)
5	Remove left taillamp (E3), right taillamp (E4)	Installation: ensure that condition and seating of gasket are correct, replace if necessary.
6	Install in the reverse order
7	Perform a function test