Retrofit control module and interface - AZ82.70-P-0008-01P

Place ICANI box (2) and interface box for hands-free system (3) on the front passenger footplate (9), mark hole pattern and drill to 2 mm dia.
Attach control module to the footplate (9) with commercially available sheet metal screws (10).

Fig 1: Identifying ICANI Box, Hands-Free System Interface Box And Front Passenger Footplate
Route connection coupling (8) from the telephone console to the interface box for the hands- free system (3) and connect to the interface box of the hands-free system (3).
The plugs have different codings and only fit in the respective coupling.

Fig 2: Identifying Connection Coupling And Hands-Free System