LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2002 >> C240 Standard >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Collision/Avoidance >> Electrical -- Testing & Repair -- 203 Chassis >> Testing & Repair >> Removing and installing combination switch - AR54.25-P-2800PQ

Removing and installing combination switch - AR54.25-P-2800PQ

MODEL 203 as of 24.4.04, 209 as of 1.6.04 

Shown on model 203 

Fig 1: Identifying Combination Switch And Bolt - Model 203 As Of 24.4.04, 209 As Of 1.6.04
G04733861
REMOVINGINSTALLING Removal/installation     
DANGER Risk of injury.  Injuries may result when performing testing or repair work on airbag or emergency tensioning retractor units. Store airbag units with deployment side facing up; do not expose to temperatures greater than 100 °C. When working on these units, disconnect the power supply. AS91.00-Z-0001-01A
DANGER Risk of explosion  caused by oxyhydrogen gas. Risk of poisoning and caustic burns  caused by swallowing battery acid. Risk of injury  caused by burns to skin and eyes from battery acid or when handling damaged lead-acid batteries No fire, sparks, open flames or smoking. Wear acid-resistant gloves, clothing and safety glasses. Pour battery acid only into suitable and appropriately marked containers. AS54.10-Z-0001-01A
NOTES Notes on battery All models AH54.10-P-0001-01A
1.1 Remove steering column adjustment switch With driver seat, steering column and electrically adjustable outside mirror with memory code 275 AR54.25-P-2804PQ 
2.1 Remove cruise control push-button switch (TPM) Only with cruise control code 440 AR54.25-P-2803PQ 
3.1 Remove VCS [SBS] switch (S93/2) with Voice Control System (VCS [SBS]) code 813 AR82.70-P-0002PQ
4 Remove bolts (1)    
5 combination switch (S4) IMPORTANTInstallation:  Slide combination switch (S4) into the guides provided for this.  
6 Install in the reverse order    
7 Perform basic programming Model 203 AR00.19-P-0200P
    Model 209 AR00.19-P-0200Q
8 Read out fault memory and erase IMPORTANT Faults stored due to cables being disconnected for assembly/testing operations or due to a simulation, must be processed and erased from the fault memories after work is completed.  
    STAR DIAGNOSIS diagnosis system *WH58.30-Z-1048-13A 
9 Perform function check    
COMMERCIALLY AVAILABLE TOOLS

Number Designation
WH58.30-Z-1048-13A STAR DIAGNOSIS diagnosis system, Compact Passenger Car 6511 1801 00