Detaching and attaching torsion bar connecting rod on rear axle - AR32.30-P-0630-01P

REAR AXLE TORSION STRUT

Number	Designation		Model 203	Model 209
BA32.20-P-1001-04C	Nut, connecting rod to torsion strut	NM	40	40
BA32.20-P-1005-04C	Bolt, connecting rod to wheel carrier	NM	40	40

1. Unscrew bolt of link rod (78) to wheel carrier.
2. Unscrew bolt of torsion bar to link rod (78).
3. Remove link rod (78) from the support points on the torsion bar and wheel carrier.
4. Install in reverse sequence.
   Fig 1: Identifying Link Rod