Prepare oil consumption measuring drive - SM18.00-P-0002A
ENGINE 272.### ## up to 053879 in MODEL 164
ENGINE 272.### ## up to 058705 in MODEL 171
ENGINE 272.### ## up to 053555 in MODEL 203
ENGINE 272.### ## up to 053555 in MODEL 209
ENGINE 272.### ## up to 052208 in MODEL 211
ENGINE 272.### ## up to 052208 in MODEL 219
| 1 | Provide scales (with accuracy of 5 g), oil container (10 l), stop watch and remote thermometer | Figure | |
| Checking | |||
| Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between columns of vehicle lift and position four support plates at vehicle lift support points specified by vehicle manufacturer. | AS00.00-Z-0010-01A | |
| Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns during starting procedure or when working near the engine as it is running | Secure vehicle to prevent it from moving by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. |
AS00.00-Z-0005-01A | |
| Risk of injury to skin and eyes caused by handling hot or glowing objects. | Wear safety gloves, protective clothing and safety glasses, if necessary. | AS00.00-Z-0002-01A | |
| 2 | Weigh empty oil container ("TARE") | ||
| 3 | After conditioning, place vehicle on lifting platform when oil temperature is 90°C | ||
| 4 | Open oil filler cap and pull oil filter | ||
| 5 | Remove under-ride guard and open oil drain screw | ||
| 6 | Drain engine oil into oil container and tighten oil drain screw again. | ||
| *BA01.45-P-1001-01M | |||
| 7 | Place filled oil container on scales and weigh | ||
| 8 | Top up oil container with oil to 6.8 kg and pour into engine. | ||
| 9 | Install oil filter and fit oil filler cap | ||
| 10 | Document weight of oil poured into engine and mileage of vehicle | OF18.00-P-3000-03A |
| Number | Designation | Engine 272 | |
|---|---|---|---|
| BA01.45-P-1001-01M | Oil drain screw to oil pan | Nm | 30 |