Remove/install light switch module - AR54.25-P-3270P

MODEL 203, 209 

Fig 1: Identifying Light Switch Module Remove/Install Components - Illustrated On Model 203.0

Illustrated on model 203.0 

MODIFICATION NOTES

24.5.06

"Disconnect/connect ground line on battery" removed

	Remove/install
1	Remove side cover (1)
2	Remove screw (5)	Pull out parking brake release (4).
3	Unclip and remove lamp switch module (S1)	Unclip in direction of arrow.
4	Release connector (3) and disconnect
5	Unlock headlamp range adjuster (2) and detach from lamp switch module (S1) (arrow)	Except code (612b) xenon headlamp unit
6	Install in the reverse order