Rear SAM control module with fuse and relay module, task - GF54.21-P-4112-01Q

General 

General 

The rear SAM control module with fuse and relay module (N10/2) is connected to the CAN class B (interior bus).

It detects sensor signals, fill levels and switch status and passes on this information via CAN class B. Furthermore, semiconductor switches which are located in the rear SAM control module with fuse and relay module (N10/2) and relays of the fuse and relay blocks are actuated.

Tasks 

Reads in: 

• Sensor signals
• fill level sensors
• switches
• information via CAN messages

Switching of: 

• consumers via semiconductor switches

Actuation of: 

• Relay

Transmission of: 

• information via CAN messages

  The following functions are realized by the rear SAM control module with fuse and relay module (N10/2) separately or in parallel:

• vehicle rear exterior lights,
• trunk lighting,
• crash opening,
• heated rear window,
• fuel gauge,
• central locking (trunk lid, filler cap),
• ATA control (master function) (with code (551a) anti-theft alarm system (ATA)),
• rear roller blind (with code (540a) electrical roller blind for rear window).