SPS solenoid valve, function - GF46.50-P-5000-01B

Model 203.0 as of 01.08.01 

Models 203.2, 203.7 

Models 209, 211, 215, 220, 230 

Fig 1: SPS Solenoid Valve Function Graph - Models 203.0 As Of 01.08.01, 203.2, 203.7, 209, 211, 215, 220, 230

SPS solenoid valve (Y10) open 

Fig 2: Identifying SPS Solenoid Valve Open - Models 203.0 As Of 01.08.01, 203.2, 203.7, 209, 211, 215, 220, 230

SPS solenoid valve (Y10) closed 

Fig 3: Identifying SPS Solenoid Valve Closed - Models 203.0 As Of 01.08.01, 203.2, 203.7, 209, 211, 215, 220, 230

The electronics for actuation of the SPS solenoid valve (Y10) are integrated in the traction system control module (N47). The SPS solenoid valve (Y10) is actuated in pulses. As the vehicle speed increases, the current flow decreases and the SPS solenoid valve (Y10) gradually opens the control valve according to a characteristic (K) defined in the traction system control module (N47).

This regulates the oil flow and thus the torque to be applied to the steering wheel. When the SPS solenoid valve (Y10) is actuated with the maximum current (v=0 km/h), the control valve is closed.

No oil flows and the minimum steering wheel torque is set (situation for parking).