Removing and installing clutch pedal - AR29.10-P-4598P

MODEL 203, 209.3 /4 with TRANSMISSION 716.6 

Fig 1: Identifying Clutch Pedal Remove/Install Components

	Remove/Install
	Risk of poisoning from swallowing brake fluid. Risk of injury  from brake fluid coming into contact with skin and eyes.	Pour brake fluid only into suitable and appropriately marked containers. Wear protective clothing and eye protection when handling brake fluid.	AS42.50-Z-0001-01A
	Brake fluid notes	All models	AH42.50-P-0001-01A
	Notes on externally invisible brake fluid loss	Model 203, 209.342, 209.361, 209.4	AH42.10-P-9406-02A
1	Remove pedal assembly	Avoid brake fluid, contamination in the interior, otherwise parts in the interior may become damaged.	AR29.10-P-0300P
2	Pull out pin (1) above booster spring (4) on clutch pedal (5)	Installation:  Grease pin (1) slightly when installing. Check pin for wear and damage and replace if necessary.	*BR00.45-Z-1001-06A
3	Pull out pin retainer (2)
4	Pull pin (3) out of pedal bracket	Lightly grease pin (3) when installing. Check pin for wear and damage and replace if necessary.	*BR00.45-Z-1001-06A
5	Remove clutch pedal (5)
6	Remove covering (6)	Check covering (6) for wear; replace if necessary.
7	Install in the reverse order

REPAIR MATERIALS

Number	Designation	Order number
BR00.45-Z-1001-06A	Long-life grease	A 000 989 63 51