Manual raising/lowering of power windows, function - GF72.29-P-3006PP

MODEL 203 

Function requirements: 

• No overvoltage or undervoltage and
• C. 15 ON or C. 15R ON

Function 

The manual raising/lowering function is actuated by pulling back or pushing forward a power window switch in the "open" or "close" direction as far as the first click-stop position.

Via the corresponding:

• Left front door control module (N69/1)
• Right front door control module (N69/2)
• Left rear door control module (N69/3) and or
• Right rear door control module (N69/4)

the corresponding:

• Left front power window motor (M10/3)
• Right front power window motor (M10/4)
• Left rear power window motor (M10/5)
• Right rear power window motor (M10/6)

are actuated as long as the switch is actuated.

Model 203.7 is not equipped with rear door control modules or power window motors.

Function survey for manual raising 

The "manual raising" button function effects window movement for

• Synchronized windows with excess force limitation (pinch protection)
• Non-synchronized windows without excess force limitation (pinch protection)

The "manual raising" function is performed for as long as an actuation of the corresponding operating switch is detected. When actuation is no longer detected, the window adjustment is immediately aborted.

Function survey of manual lowering 

The "manual lowering" button function effects window movement without excess force limitation. It can be performed without synchronization.

The "manual lowering" function is performed for as long as an actuation of the corresponding operating switch is detected. When actuation is no longer detected, the window adjustment is immediately aborted.

Automatic raising/lowering power windows, function

GF72.29-P-3007PP