Remove/install armrest cover lock on center console - AR68.20-P-2380P

MODEL 203, 209 

with CODE (326) Telephone holder in front armrest 

with CODE (386) Preinstallation for "portable CTEL" UPCI telephone system 

MODEL 209 with CODE (494) USA version 

Shown on model 209 

Fig 1: Identifying Armrest Cover Lock On Center Console Remove/Install Components

	Remove
1	Open cover (1)	For this purpose, actuate button (3).
2	Press both levers (2) in direction of arrow	Keep both levers (2) pressed.
3	Slightly swivel lid (1)	Until button (3) extends again.
4	Remove lock (6)	Press onto lock (6) with suitable tool until it is unlocked and remove from cover toward front of vehicle. Do not damage component and area around to ensure proper function
	Install
5	Press pin (4) into lock (6)	Keep pin (4) pressed.
6	Install lock (6) in cover (1)	Until lock (6) arrests audibly
7	Press both levers (2) in direction of arrow	Hold down both levers (2) and pin (4)
8	Actuate button (3)	Release both levers (2) and pin (4)
9	Release button (3).
10	Close lid (1)	Until button (3) extends again.
	Check
11	Check lid (1) for proper function	For purpose press button (3, 5) or button (7) to open cover (1).The opening direction is specified by buttons (3, 5, 7).
12	Close lid (1)