LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2001 >> SLK320 Automatic >> Repair and Diagnosis >> Suspension >> Rear Suspension >> Rear Axle -- Testing & Repair -- 170 Chassis - 2 Of 2 >> Testing & Repair >> Remove/install rear axle shaft - AR35.30-P-0620 >> Remove/install rear axle shaft - AR35.30-P-0620A >> Pressing protection ring off and on rear axle shaft or connecting flange - AR35.30-P-0620-05R

Pressing protection ring off and on rear axle shaft or connecting flange - AR35.30-P-0620-05R

Fig 1: Identifying Drift (140 589 16 15 00)
G04636290
Fig 2: Identifying Drift (211 589 03 15 00)
G04636291

    Pushing off 

  1. Using a suitable screwdriver, pry protection ring (33k) off the connecting flange (33) or rear axle shaft (arrow).

    Shown on vehicles with connecting flange 

    Fig 3: Identifying Pry Protection Ring And Connecting Flange
    G04636292

    2. Pressing on 

  2. Press protective ring (33k) onto rear axle shaft (33) using SPECIAL TOOL drift (045).

    IMPORTANT On rearaxle differential ø 187 mm, 198 mm, 200 mm, 210 mm SPECIAL TOOL use drift (045, 140 589 16 15 00).

    On rear axle differential ø 215 mm SPECIAL TOOL use drift (045, 211 589 03 15 00).

    Shown on vehicles with connecting flange 

    Fig 4: Identifying Pry Protection Ring And Rear Axle Shaft
    G04636293
Fig 5: Identifying Extraction And Insertion Tool (210 589 03 43 00)
G04636266
Fig 6: Identifying Bracket (210 589 01 40 00)
G04636267
scientia non olet · About LEMON Manuals