Inserting sleeve for tensile strut in wheel carrier - AR35.20-P-0111-01A
Diameter of wheel carrier bores modified
Bolted connection of torque strut to wheel carrier modified
| AR35.20-P-0111-01A | Inserting sleeve for tensile strut in wheel carrier | ||
| Diameter of wheel carrier bores modified | BT35.20-P-0005-01A | ||
| Bolted connection of torque strut to wheel carrier modified | BT35.20-P-0008-01A |
If a new torque strut (3) is installed on a previous version of the wheel carrier (attachment bore dia. in wheel carrier approx. 13.5 mm), it is absolutely essential to fit the sleeve (3h) in the wheel carrier (7) to reduce the diameter to approx. 12.2 mm.