Check and adjust axial play of connecting flange - AR35.31-P-0540-02E
Test values for connecting flange/differential housing
| Number | Designation | Model 124 | Model 129 | Model 170 | Model 201 | |
|---|---|---|---|---|---|---|
| BE35.31-P-1001-05A | Axial play between connecting flange and differential housing | mm | 0.03-0.3 | 0.03-0.3 | 0.03-0.3 | 0.03-0.3 |
Test values for connecting flange/differential housing
| Number | Designation | Model 202 | Model 208 | Model 210 | |
|---|---|---|---|---|---|
| BE35.31-P-1001-05A | Axial play between connecting flange and differential housing | mm | 0.03-0.3 | 0.03-0.3 | 0.03-0.3 |
Check end play between connecting flange and rear axle side gear. If necessary install a thinner or thicker spacer ring (31b).
End play must be within specified tolerance range.
Spacer rings are available in thicknesses ranging between 0.7 mm and 1.5 mm in graduations of 0.05 mm.