Correcting oil level in air conditioning after replacing parts - AR83.30-P-5252C

MODEL 129 with CODE (580) Air conditioning or, for USA, Tempmatic with CODE (581a) Air conditioning (automatic) 

A/C compressor 10PA17 

	Perform work quickly, compressor oil is hydroscopic When evacuating refrigerant add the quantity of compressor oil removed from the refrigerant circuit when recharging the air conditioner.
1	Replace A/C compressor and also add new compressor oil		*BF83.55-P-1008-01A
2	Replace condenser and also add new compressor oil		*BF83.55-P-1003-01A
3	Replace evaporator and also add new compressor oil		*BF83.55-P-1004-01A
4	Replace fluid reservoir and also add new compressor oil		*BF83.55-P-1005-01A
5	Replace intake line from evaporator to A/C compressor and also add new compressor oil		*BF83.55-P-1006-01A
6	Replace pressure line from A/C compressor to condenser and also add new compressor oil		*BF83.55-P-1007-01A
7	Switch on air conditioning and allow engine to idle for approx. 4 minutes	Allow temperature dials to catch in blue field or set automatic air conditioning to " Lo". Blower to max.
8	Check air conditioning for proper function	Air outlet temperature at center nozzle should not be less than approx. + 5°C, if necessary ↓ replace evaporator temperature sensor (B10/6)

A/C COMPRESSOR