Blower, function - GF83.10-P-2102-02M
Function
The rear A/C pushbutton control module transfers a control voltage of 0 - 6V to the rear blower regulator. This then controls the operating voltage for the rear blower (0 - 12 V) depending on the control voltage present. This provides for control of the blower speed from 0 100 %.
The blower control (operating voltage) is affected by the following factors:
- Blower speed (AUTO/manual)
- Control functions (ON/OUT, EC, REST, air distribution)
- Circuit 15 (blower ON), starter running (blower OFF)