LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2001 >> S600 >> Repair and Diagnosis >> Accessories & Equipment >> Headlights >> Electrical System -- Basic Knowledge -- 215 & 220 Chassis - 2 Of 2 >> Basic Knowledge >> Dialing, function - GF82.70-P-3000 >> Dialing, function - GF82.70-P-3000C

Dialing, function - GF82.70-P-3000C

MODELS 202.08 /09 /18 as of 1.6.00, 203 up to 23.4.04, 208.3, 210 as of 1.6.00,215, 220 as of 1.6.00 up to 31.8.03 with CODE (813) Voice control system (VCS) Selection and dialogue with the audio components (radio, CD, cassette) 

Fig 1: Identifying Activating/Accepting Call And VCS (SBS) Switch - Models 202.08 /09 /18 As Of 1.6.00, 203 Up To 23.4.04, 208.3, 210 As Of 1.6.00,215, 220 As Of 1.6.00 Up To 31.8.03 With Code (813)
G04633630

Control of audio functions 

After activating the voice control system (VCS) with the VCS switch (S93/2), the user has (depending on the equipment) several options for establishing a desired audio connection, provided the radio component of the particular vehicle-specific audio system is activated.

To request the desired audio function, the following commands can be used.

To activate the radio component:

To activate the CD component (except code (818a) CD changer in luggage compartment (10-disks), except code (818b) single CD player additional equipment, except code (819) CD changer (6-disk), except code (819a) CD changer):

To activate the cassette component:

To activate the CD component (with code (818a) CD changer in luggage compartment (10-disks), with code (818b) single CD player additional equipment, with code (819) CD changer (6-disk), with code (819a) CD changer):

If the user is then in the dialog mode with the desired audio function, additional commands are available for control within the system.

If the radio component is activated, the following control commands are available:

If the cassette component is activated, the following control commands are available:

If the CD component is activated, the following control commands are available:

A personal station list can be created with the commands listed above. The sequence is the same as for creating a personal telephone book, however, with the commands listed above.

A help function is available that supports the user in operating the VCS. If the user is in dialogue mode with the radio component of the particular vehicle-specific audio system and says the word "Help", the VCS reads out the most important commands of the radio components. If the user is in dialogue mode with the cassette component, then they can say "Help Radio" whereupon the system is changed and the VCS reads out the most important radio component commands.

  Station list, function   GF82.70-P-3002P 
  Voice control system switch, location/task   GF82.70-P-4100B 
  Hands-free microphone, location/task Models 202, 208, 210
with code (274) MB D-net telephone
Models 202, 210
with code (312) D-network portable CTEL telephone
with code (313) D-network portable CTEL
with code (314a) "Standard" D-network telephone
Models 202, 208, 210, 215, 220
with code (316) MB D-network telephone (D2B)
with code (317) D-network portable CTEL telephone (D2B)
Model 203 with CODE (450) taxi version
Models 203, 208, 210, 215, 220
with code (853) MB standard telephone
Models 202, 203, 208, 210, 215, 220
with code (854) MB portable CTEL telephone
GF82.70-P-4102B 
  Hands-free system loudspeaker, location/task Models, 202, 208, 210
with code (274) MB D-net telephone
Models 202, 210
with code (312) D-network portable CTEL telephone
with code (313) D-network portable "CTEL telephone"
with code (314a) "Standard" D-network telephone
Model 202, 208, 210, 215, 220
with code (316) MB D-network telephone (D2B)
with code (317) D-network portable CTEL telephone (D2B)
Models 203, 208, 210, 215, 220
with code (853) MB standard telephone
Models 202, 203, 208, 210, 215, 220
with code (854) MB portable CTEL telephone
GF82.70-P-4103B 
  Voice control system control unit, location/task   GF82.70-P-4113A