Removing and installing front door infrared remote control receiver - AR80.30-P-4305M

MODEL 215, 220 

Illustrated on model 220 

Fig 1: Identifying Front Door Infrared Remote Control Receiver Remove/Install Components - Illustrated On Model 220

	Removal, installation
1	Pull out plug (1) in area of door lock
2	Unscrew mounting screw for left front IR receiver (A26/1) with Torx socket wrench (2)	Secure mounting screw against falling down from Torx socket bolt (e.g. magnetizing Torx socket wrench)
			*BA72.10-P-1007-01E
3	Carefully remove left/right front IR receiver (A26/1, A26/2)
4	Disconnect electrical connector (3)	When installing ensure electrical connector (3) is clipped correctly
5	Install in opposite order
6	Check of power windows for proper function (one-touch window up feature)

FRONT DOOR

Number	Designation		Model 215	Model 220
BA72.10-P-1007-01E	Screw for door handle on front door	Nm	3	3